Pro AV Catalog
Request Quote
All Products
Studio quality boundary layer microphone with 3 pin XLR phantom power adapter and high end windscreen. Premium table-top mic.
Model: C547 BL
Part #: 2447Z00010
- Hypercardioid polar pattern - for maximum rejection of disturbing signals
- Acoustics based on C747 V11 - for wide, smooth frequency response
- RFi-Shield technology - reduces interference noise due to electromagnetic pollution
- Rugged, low profile housing - withstands the rigors of the stage
- Paintable grille assembly - to blend in with stage decoration
Product Info
Tech Specs
Documents
Live on stage
for houses of worship, theater and bass drum recording.
The C547 is a hypercardioid professional boundary layer microphone. The rugged, non-crush case and a switchable bass-cut filter make the C547 an ideal choice for tough on-stage assignments. Using PCC® (Phase Coherent Cardioid®) technology with hypercardioid polar pattern, the microphone provides high directivity and neutral sound. The C547 is built on the same acoustical components as the legendary C747 V11.
Primarily designed for use in houses of worship, theaters and conferencing, the C547 BL is also a good choice for miking kick drums and other instruments. The highly efficient RFi-Shield technology substantially reduces interference noise due to electromagnetic pollution.
for houses of worship, theater and bass drum recording.
The C547 is a hypercardioid professional boundary layer microphone. The rugged, non-crush case and a switchable bass-cut filter make the C547 an ideal choice for tough on-stage assignments. Using PCC® (Phase Coherent Cardioid®) technology with hypercardioid polar pattern, the microphone provides high directivity and neutral sound. The C547 is built on the same acoustical components as the legendary C747 V11.
Primarily designed for use in houses of worship, theaters and conferencing, the C547 BL is also a good choice for miking kick drums and other instruments. The highly efficient RFi-Shield technology substantially reduces interference noise due to electromagnetic pollution.
- Hypercardioid polar pattern - for maximum rejection of disturbing signals
- Acoustics based on C747 V11 - for wide, smooth frequency response
- RFi-Shield technology - reduces interference noise due to electromagnetic pollution
- Rugged, low profile housing - withstands the rigors of the stage
- Paintable grille assembly - to blend in with stage decoration
- Polar/Pickup Pattern - Hypercardiod
- Microphone Connectivity - Wired
- Shipping Weight: 2.30 oz.
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 30 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Maximum SPL (Sound Pressure Level): 133 dB
- Signal to Noise Ratio: 72 dB
- Product Weight: 0.79 lbs
- Transducer Principle: Condenser prepolarized
- Polar Pattern: hypercardioid
- Frequency Response: at 1,000Hz 8.5mV/Pa (-41dBV)
- Equivalent Noise Level: < 22 dB-A
- Electr. Impedance: < 400 ohms
- Load Impedance: > 1,000 ohms
- Power Requirement: 9 to 52V phantom powering
- Overall Length: 3-Pin XLR-type
- Overall Length: 10 ft
- Finish: Non reflective black
- Special Features/Applications: Rugged boundary layer design, switchable bass-cut 12dB/octave, 200Hz
- Included Accessories: Windscreen, phantom power adapter
- Optional Accessories: B 18 battery power supply, N 62 E, N 66 E AC power supplies
- Screen Size: 7.3 x 4.7 x 0.8 in
C547BL
86 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact Corporate AV Services
close
Corporate AV Services
8508 Buffalo Drive
Suite B
Commerce Township, MI 48382
USA
(248)939-0900
www.corporateav.net
Contact in regards to this product:
AKG Acoustics, U.S.
Model: C547 BL
Request more information from a dealer near you
close
Request more information from a dealer near you