Pro AV Catalog

Network Technologies Inc (NTI) - ST-IPHD-LC-V4UK
Network Technologies Inc (NTI) - ST-IPHD-LC-V4UK Network Technologies Inc (NTI) - ST-IPHD-LC-V4UK Network Technologies Inc (NTI) - ST-IPHD-LC-V4UK
Request Quote
All Products
network-technologies-nti

Low-Cost HDMI Over Gigabit IP Network Range Extender (Next-Generation Model), UK BS1363

Series: XTENDEX®

Model: ST-IPHD-LC-V4UK

  • Supports HDTV resolutions to 1080p. Extend up to 394 feet (120 meters) with CAT6/6a/7 cable. Extend up to 328 feet (100 meters) with CAT5e cable.
  • Cascade network switches to extend the length long distances. The max cable lengths between the first switch/transmitter and between the last switch/receiver are 394 feet (120 meters) for CAT6/6a/7 or 328 feet (100 meters) for CAT5e cables. The max cable lengths between switches is switch dependent, but 328 feet (100 meters) is typical. An unlimited number of switches can be cascaded.
  • Ideal solution for digital signage applications.
  • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
  • Transmits an HDMI signal over one CATx cable.
Compare
Project List
Product Info
Tech Specs

The XTENDEX® Low-Cost HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 394 feet away over a 100/1000 Base-T Gigabit Network connected with CAT6/6a/7 cable.

Each Low-Cost HDMI Over Gigabit IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

Note: ST-IPHD-LC-V4 models are NOT compatible with ST-IPHD-LC(-CLR) models due to different chipsets being used.

For more information, visit https://www.networktechinc.com/hdmi-ip-extender.html

  • Supports HDTV resolutions to 1080p. Extend up to 394 feet (120 meters) with CAT6/6a/7 cable. Extend up to 328 feet (100 meters) with CAT5e cable.
  • Cascade network switches to extend the length long distances. The max cable lengths between the first switch/transmitter and between the last switch/receiver are 394 feet (120 meters) for CAT6/6a/7 or 328 feet (100 meters) for CAT5e cables. The max cable lengths between switches is switch dependent, but 328 feet (100 meters) is typical. An unlimited number of switches can be cascaded.
  • Ideal solution for digital signage applications.
  • Broadcast real-time HDMI video and audio signals to multiple display locations with a managed or unmanaged (also known as non-managed) network switch.
  • Transmits an HDMI signal over one CATx cable.
  • Plug-and-Play installation allows receivers to find the transmitters automatically on the same subnet. (Network configuration may be required for managed network switch.)
  • Web interface for firmware updates.
  • Easily expandable. Add remote units as you add monitors.
  • Inexpensive CATx cable replaces bulky video cables.
  • Supports 100/1000 Base-T Ethernet connection.
  • Built in default EDID table.
  • HDMI 1.3 and HDCP 1.4 compliant.
  • Support for multiple transmitters requires a managed network switch with VLAN support. Standard LAN switches can only support one transmitter. The managed switch must support port-based IEEE 802.1Q VLAN. Each VLAN acts as a separate HDMI Over IP Channel on the network. Each VLAN channel supports one transmitter. Number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
  • For a point-to-many connection, a standalone network with an unmanaged network switch, hub, or router can be used instead of a managed network switch. Up to 253 receivers supported. It is not recommended to use any other network devices on this standalone network as it may cause a degradation in performance.
  • Uses H.264 technology to process image compression.
  • Local and remote units must be in the same LAN. The units do not support WAN connections.
  • Note: ST-IPHD-LC-V4 models are NOT compatible with ST-IPHD-LC(-CLR) models due to different chipsets being used.
 
Request Quote