Pro AV Catalog

Network Technologies Inc (NTI) - ST-IPFOHD-R-LC-ULC
Network Technologies Inc (NTI) - ST-IPFOHD-R-LC-ULC Network Technologies Inc (NTI) - ST-IPFOHD-R-LC-ULC
Request Quote
All Products
network-technologies-nti

Low-Cost HDMI Extender Over IP via One LC Singlemode/Multimode Fiber Optic Cable - Remote Unit

Series: XTENDEX

Model: ST-IPFOHD-R-LC-ULC

  • Signal transmission via single-strand LC fiber optic cable. Using singlemode 9-micron cable, extend to 24.8 miles (40 km). Using 50-micron OM3 (or better) multimode cable, extend to 984 feet (300 meters).
  • Supports HDTV resolutions to 1080p.
  • Cascade network switches to extend the length longer distances. Up to three switches can be cascaded.
  • HDMI features supported: HDMI 1.3. 36-bit Deep Color. RGB, YCbCr 4:4:4, and YCbCr 4:2:2. LPCM. Bandwidth up to 4.46 Gbps.
  • HDCP 1.4 compliant.
Compare
Project List
Product Info
Tech Specs
Documents

The XTENDEX® HDMI Extender Over IP via Fiber Optic Cable transmits digital video, embedded audio, and IR signals up to 24.8 miles (40 kilometers) away from an HDMI source using a single LC singlemode fiber optic strand or 984 feet (300 meters) using OM3 LC multimode fiber optic cable.

Each HDMI Extender Over IP consists of a local unit that connects to an HDMI source and also supplies video to a local monitor, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

For more information, visit https://www.networktechinc.com/hdmi-over-fiber.html

  • Signal transmission via single-strand LC fiber optic cable. Using singlemode 9-micron cable, extend to 24.8 miles (40 km). Using 50-micron OM3 (or better) multimode cable, extend to 984 feet (300 meters).
  • Supports HDTV resolutions to 1080p.
  • Cascade network switches to extend the length longer distances. Up to three switches can be cascaded.
  • HDMI features supported: HDMI 1.3. 36-bit Deep Color. RGB, YCbCr 4:4:4, and YCbCr 4:2:2. LPCM. Bandwidth up to 4.46 Gbps.
  • HDCP 1.4 compliant.
  • Full Infrared Remote (IR) control of HDMI source from remote HDTV using existing source remote control.
  • For a point-to-many connection, a standalone network with an unmanaged SFP network switch, hub, or router can be used instead of a managed SFP network switch.
  • Easily expandable. Add remote units as you add monitors. Up to 253 receivers supported. It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.
  • Support for multiple transmitters (many-to-many connection) requires a managed SFP switch with VLAN support. Standard LAN switches can only support one transmitter.
  • The managed SFP switch must support port-based IEEE 802.1Q VLAN.
  • Each VLAN acts as a separate HDMI Over IP Channel on the network. Each VLAN channel supports one transmitter. Number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
  • Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
  • Local and remote units must be in the same LAN. The units do not support WAN connections.
  • Buffered HDMI input loop-through.
  • Low RFI/EMI for sensitive applications.
  • Built-in default EDID table.
  • Cables can be installed in conduit prior to extender installation.
  • Integrated mounting brackets for easy surface/wall mounting.
 
Request Quote