Pro AV Catalog

< Back to Previous Page

Home : Camera Controls : DJI - CP.BX.000165

All Products

1360T Quick Release Propellers for Inspire 1 Aircraft

Model: CP.BX.000165

Gain values must be adjusted according to the combination of gimbal and motors used
Zenmuse X3 or X5 gimbal and 3510 motors are used, no adjustments are necessary
Zenmuse X5 gimbal and 3510H motors are used, no adjustments are necessary
Zenmuse X3 gimbal and 3510H motors are used, adjustments are required
Recommended gain values are: Pitch = 90, Roll = 90 and Yaw = 90

More Product Information Below

Compare

Project List

Product Info

The CP.BX.000165 is a 1360T quick release propellers for use with inspire 1 series aircraft ait high-altitude operations. Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller. A larger propeller pitch delivers greater propulsion to the aircraft at altitudes with thinner air. These props should not be mixed with other models of propellers on the same aircraft.

Gain values must be adjusted according to the combination of gimbal and motors used
Zenmuse X3 or X5 gimbal and 3510 motors are used, no adjustments are necessary
Zenmuse X5 gimbal and 3510H motors are used, no adjustments are necessary
Zenmuse X3 gimbal and 3510H motors are used, adjustments are required
Recommended gain values are: Pitch = 90, Roll = 90 and Yaw = 90
When flying at low-altitude locations, extra propulsion demand from the 1360T props will lead to reduced flight time and higher battery consumption
Which in turn leads to a decrease in battery level
Recommended gain values are intended for flight at a low altitude location
Adjust the values according to the immediate environment at your discretion