Pro AV Catalog

< Back to Previous Page

Home : Audio Production Equipment : Applied Research & Technology - MyMONITOR

All Products

Personal Headphone Monitor Mixer

Model: MyMONITOR

XLR Mic In connector accepts a dynamic or condenser mic
XLR Mic Thru connector for connecting MyMONITOR to the mixer’s mic input
1/4” stereo Monitor In jack accepts the stereo output of a mixer, CD player, tape deck, etc. to be mixed with the mic signal through the headphones
Mic Level control regulates the mic’s headphone level
Monitor Level control regulates the stereo Monitor inputs level through the headphones

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The MyMONITOR is connected between the mic and line source, and the mixer. The Mic and line Monitor levels can then be adjusted for mix and volume through the headphones. Only the mic signal will go to the board. And since MyMONITOR can also be battery powered, the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or condenser mics can be used since phantom power would come through the Mic Thru jack from the mixer or other source.

XLR Mic In connector accepts a dynamic or condenser mic
XLR Mic Thru connector for connecting MyMONITOR to the mixer’s mic input
1/4” stereo Monitor In jack accepts the stereo output of a mixer, CD player, tape deck, etc. to be mixed with the mic signal through the headphones
Mic Level control regulates the mic’s headphone level
Monitor Level control regulates the stereo Monitor inputs level through the headphones
Dual stereo headphone outputs

Warranty - Yes
Spec Sheet available - Yes

Signal to Noise Ratio: 90 dB
DC Voltage: 12 Volts
Product Weight: 1.30 lbs
Warranty (Length/Type): 90 days
Maximum Input Level(Mic/Monitor): -20/40 dB
Output Impedance: 10 ohms
Gain(1/4" or XLR): 15 or 50 dB
Dimensions: 4.5 x 2.75 x 1.5 inch

Monitor Mixer 58 kb - Data Sheet