Pro AV Catalog

< Back to Previous Page

Home : Audio Production Equipment : Williams AV - DL210 SYS 1 2.0

All Products

Digi-Loop Large Area, Dual Channel Hearing Loop System

Model: DL210 SYS 1 2.0

System Includes:
(1) DL210 NET 2.0 – Induction Loop Amplifier
(2) PLR BP1 – Body-Pack Receivers with Batteries
(2) EAR 022 – Surround Earphones
(1) BAT KT6 – Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DL210 SYS 1 2.0 hearing loop system maximizes modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring of the induction loop system via a laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, and more. Powerful Class D pulse-width amplifier maximizes the efficiency of the unit.

This assistive listening system’s design offers a dual 12 A rms loop output for dual loop or phased array configuration. A 70-100 V input connects to a distributed speaker/paging system, ensuring announcements are heard by hearing aid users.

Meet IEC 60118-4 standards on system performance when integrated into a correctly designed and installed system. The DL210 SYS 1 2.0 is also tested to IEC Specifications 62489-1 Benchmark Standards.

System Includes:
(1) DL210 NET 2.0 – Induction Loop Amplifier
(2) PLR BP1 – Body-Pack Receivers with Batteries
(2) EAR 022 – Surround Earphones
(1) BAT KT6 – Dual Drop-in Charger Kit (includes CHG 3502 Dual Drop-In Charger and (2) BAT 026-2 AA NiMH batteries)
(1) IDP 009 – ADA Wall Plaque (T-Coil)

Warranty - Yes
Spec Sheet available - Yes

Warranty (Length/Type): 2 Year
DL210 NET 2.0:
•Dimensions: 2 RU Rackmount, 19” W x 3.5” H x 12” D. Chassis is 17” W.
•Weight: 14.3 lbs (6.5 kg)
•Color: Case: Black, white and blue legends on front, white legends on back. LCD: Backlit Blue.
•Fan cooling: Variable Speed, Temperature Controlled
•Power supply: Internal, Universal 100-240 VAC, 50/60 Hz, 250 Watt. Fuse: 5 x 20 mm, 5 A, 250 V. AC power plug is IEC 320-C14.Heat output at 120 VAC: Sleep state: 100 BTU/hr; Idle state: 146 BTU/hr; Driving two loops at 12 A each: 1,040 BTU/hr
•Ethernet: (1x) RJ-45; 10-100 MBps.
•USB: (1x) standard-B. USB 1.1, 2.0 or 3.0 supported
•RS-232/Loop fault relay: (1x) DB-9 jack. RS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gnd. Loop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NO. Relay contact rating: 2.0 A at 30 VDC
•Environment: 0-35° C ( 32-95° F), 0-90% relative humdity.
•Coverage area: 31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven) 51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven)
•INPUTS
•Dante input: No. Dante input available on DL210 NET D 2.0 model only.
•Mic/Line inputs: (2x) 3-position terminal block, input impedance=1.5 kO Mic, 10 kO Line. Configurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalanced. Phantom supply (48V).
•70-100 V input: (1x) 2-position terminal block; high/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems
•OUTPUTS
•Line outputs: (1x) 3-position terminal block; loop-through of Mic/Line Input 1 [&] Line Input 2, +4 dBu, Balanced or Unbalanced. The line outputs mirror the audio of the loop output.
•Loop output(s): (1x) 2-position terminal block per output
•Audio output delay: Adjustable from 0 to 165 msec
•Headphone output: (1x) 1/4” stereo headphone jack, on front of unit. Monitored input or output selectable in menu
•Loop fault relay: Integrated into RS-232 DB-9 jack. Pin 1=NC, Pin 4=Common and Pin 6=NO. Contact rating: 2.0 A at 30 VDC.
•Loop output drive voltage: 33.3 Vrms (47.1 Vpk) continuous
•Rated loop output current*: 12 Arms(17 Apk) per output
•Loop resistance range: 0.5 ohms to 3.0 ohms (DC)
•Speaker output: Integrated into Loop Output A terminal block (switchable in menu). 225 Watts x 1 channel at 4O, 125 Watts x 1 channel at 8O, (Class D). Frequency response = 20 Hz-20 kHz, THD=0.07%.
•AUDIO
•Rated load: 0.5 ohms DC with 135 uH inductance
•Loop frequency response: 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.)
•Rated loop THD*: [lt]1 % at rated output current (1 kHz sine wave).
•OTHER
•Front controls: Front LCD display menu access/adjustment via control button/dial.
•Adjustable settings: Input mixing, parametric equalization, compression, metal loss compensation, high and low-pass filters, AGC and audio delay, output levels. See User Manual for adjustment range(s)
•Internal calibration tools: Test tone generator with pink noise, loop current adjustment/matching
•Other features: Save/load configuration, loop test, priority input selection with adjustable threshold, loop fault relay, open/short and thermal protection
•Network control [and] firmware: Function control and calibration by DigiLoop PC App via ethernet (RJ-45). PC App requires Windows 7 or higher. Firmware updates through USB only
•Warranty: 2 years
•Approvals: CE, UL, ULC, FCC, Industry Canada, RoHS, WEEE, CB scheme, RCM
•Standards compliance: This product is designed to meet the IEC-60118-4 standard when correctly designed, installed and commissioned. Test Specifications provided to the IEC 62489-1 standard
EAR 022:
•Style: Around-ear speaker
•Plug: 3.5mm mono
•Cord: 39"
•Driver Size: 23 mm
•Nominal Impedance: 32 OHMS
•Freq. Response: 20 - 20kHz
•Weight: 15g
•Max Power Input: 30 mW
•Sensitivity: 118 dB at 1kHz
IDP 008: 10-3/8" (L) x 6-¼" (W) x 1/8" (H)
PLR BP1:
•Dimensions: 4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D)
•Weight: 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries
•Color/Material: Black ABS/polycarbonate molded plastic case
•Battery Type: (2) AA (1.5VDC) Alkaline or NiMH (rechargeable)
•Battery Life: Up to 200 hours with Alkaline batteries
•LED Indicator: Green LED indicates power on, flashes when batteries are low
•Headphone Jack: 3.5mm stereo TRS jack works with mono or stereo headphones
•Volume control: External switched thumb wheel controls power on/off and volume level
•Tone control: Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position)
•Induction Coil: Maximum reception: receiver oriented vertically
•Power Output: 35mW (max) into 33 ohms mono impedance
•THD: [lt]2%
•Frequency Response: 300Hz to 10KHz, -6dB

MCAT-232G-DL210-20.pdf 521806 kb - Data Sheet

BROM-062-loop2021.pdf 1594324 kb - Brochure

MAN-202M-PLA-DL107-207-210-2023-1.pdf 4653171 kb - Instructions