Pro AV Catalog

< Back to Previous Page

Home : Camera Auxiliary Equipment : Sound Control Technologies - RemoteTableKit™ Pro

All Products

RemoteTableKit™ Pro Table Extension Kit

Model: RemoteTableKit™ Pro

Extends power, control, USB, audio, video and Ethernet (PoE) over a standard CAT5e/CAT6 cable up to 100m.
Flexibility to power the modules from either the transmitter or receiver.
Table PoE support for Cisco Touch 10 Controller
Supports up to 3 Cisco Table Microphones
Bi-Directional Line-Level Audio Support

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The RTK-PRO™ table extension kits provide a reliable “transparent” link between the table devices and Cisco codec. Codec specific microphone cables and power supply are included in the kit. The RTK-PRO™ supports the Cisco Codec Pro, Room 70 G2, Room 70 Dual G2, and Room Kit Pro. The RTK-PRO™ provides HDMI for content, Touch 10 Ethernet and power, Audio I/O, USB, distance up to 100 meters on CAT5e/CAT6 and supports up to 3 Cisco Microphones (Table Mic 60 and Table-E Mic).

Extends power, control, USB, audio, video and Ethernet (PoE) over a standard CAT5e/CAT6 cable up to 100m.
Flexibility to power the modules from either the transmitter or receiver.
Table PoE support for Cisco Touch 10 Controller
Supports up to 3 Cisco Table Microphones
Bi-Directional Line-Level Audio Support
Simple Plug & Play installation, no programming required.
All hardware-specific codec connection cables are included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide a CAT5e/CAT6 SCTLink™ Cable.
Inclusive of RemoteTableKit™ Modules, Kit Cables and Power Supply
RTK-TX Module
RTK-RX Module
RCC-H001-1.0M HDMI Cable
RCC-H016-1.0M UTP Cable
RM-PRO Adaptors Male TRRS to Euro-Block
WPS-12 Power Supply

Warranty - Yes
Spec Sheet available - Yes

Power Consumption: A linked stand-alone kit will consume 9W, plus the power consumption of attached USB and PoE Devices
Video Format: HDMI, up to 4K 25/30 4:4:4. HDCP up to v2.2
WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
USB Link: USB 2.0 Uni-Directional USB-A (x2) and Micro-B: Receiver to Transmitter or Transmitter to Receiver
SCTLINK™ CABLE SPECS: SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems
USB Tier Usage: 1 tier (hub) per linked set
Wiring Termination: Standard T568A or T568B 10m Minimum - 100m Maximum Length
USB-A Output Power (each): 5VDC at 500mA continuous. Overload/short-circuit 1.25A max
Microphone Support (RTK-PLUS™): Up to 3 Cisco Microphone 20 or Microphone Table-J Microphones; Cisco RoomKit supports up to 2 microphones
Microphone Support (RTK-PRO™): Up to 3 Cisco Microphone 60 or Microphone Table-E microphones
PoE Support (RTK-TX™): Passive PoE, 48VDC, 7W, Class-2, Mode B per IEEE 802.3af
Audio In/Out (RTK-TX™): 3.5mm TRS Jacks, Stereo Line Level Unbalanced
Ethernet Connectivity (RTK-TX™): Single 10/100 Port with PoE
Ethernet Connectivity (RTK-RX™): 10/100 Two Port Layer 2 Ethernet Switch
RTK-TX™ Transmitter Module: Dimension: H: 1.39 x W: 10.224 x D: 4.51 inch; Weight: 1.1 lbs/498g
RTK-RX™ Receiver Module: Dimension: H: 1.39 x W: 10.224 x D: 4.51 inch; Weight: 1.1 lbs/498g
Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
Warranty (Length/Type): 3 Years

Kit 479617 kb - Data Sheet