Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : Network Technologies Inc (NTI) - ST-C6HD-AIR-300

All Products

HDMI Extender with IR Control & Stereo Audio: Extend up to 300 ft away

Series: XTENDEX®

Model: ST-C6HD-AIR-300

Transmits an HDMI signal over one CAT5e/6/7 cable.
Full IR control of HDMI source from remote HDTV using existing source remote control.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
Available with optional stereo audio.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The XTENDEX® HDMI Extender transmits digital video, audio and IR signals up to 300 feet using one CAT5e/6/7 cable. Each video extender consists of a local unit that connects to an HDMI source and IR emitter, and a remote unit that connects to an HDMI display and IR receiver.

For more information, visit http://www.networktechinc.com/hdmi-extender.html

Transmits an HDMI signal over one CAT5e/6/7 cable.
Full IR control of HDMI source from remote HDTV using existing source remote control.
Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
Refer to the resolution chart in the specifications section for resolutions using different CATx cable types and lengths.
Available with optional stereo audio.
HDMI features supported: 12-bit Deep Color; x.v.Color; Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS; Bandwidth up to 225 MHz (6.75 Gbps; Support for CEC (consumer electronic control) compatible devices; Lip Sync.
HDCP compliant.
Supports the DDC2B protocol.
Only one power supply is necessary to power both the local and remote units.

Extender Type - Audio
Extender Type - HDMI
Extender Type - Other
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Depth: 3.09 in
Height: 1.08 in
Power: Powered from a single power supply attached to either the local or remote unit. Local or remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (Country-specific AC adapter included.)
Width: 2.54 in
Dimensions: WxDxH (in): 2.54x3.09x1.08
Regulatory Compliance: CE, RoHS
Cables: Use HD-xx-MM cable to connect an HDMI source or display. Use DVI-HD-xx-MM cable to connect a DVI source or display. Use SA-xx-MM cable with units with stereo audio option to connect a stereo audio source or speakers. Use CAT5e/6/7 straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included). Use CAT6A-BULK23-BLUE-NPC CAT6a 750 MHz Solid Unshielded Bulk Cable terminated with 6A-PLG-SH-BFA CAT6a Shielded Field Assembly RJ45 Connectors for the best performance at 1080p resolution. IR transmitter/receiver included.
Environmental: Operating temperature: 32 to 122°F (0 to 50°C). Storage temperature: -20 to 140°F (-30 to 60°C). Operating and Storage Relative Humidity: 5 to 90% non-condensing RH.
Remote unit: One female HDMI connector for display. IR extension support: one female 3.5mm port for IR receiver. IR frequency range: 33 to 40 kHz. Center Carrier Frequency: 36 kHz. Optional stereo audio support: 3.5mm jack One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal. Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA). Supports embedded digital audio through HDMI compatible TVs or audio receivers. Auto equalization for different lengths of CAT5e/6/7 cable.
Local Unit: Compatible with a computer or HDTV video source with HDMI output. One female HDMI connector. IR extension support: one female 3.5mm port for IR emitter. Optional stereo audio support: 3.5mm jack One female RJ45 port for sending/receiving high definition video/audio signals, IR signal, CEC signal, and DDC signal.
Optional Stereo Audio: Stereo audio can be heard both locally and remotely. Frequency response: 20 Hz to 20 kHz, ±1 dB. Signal-to-Noise Ratio (SNR): 76 dBA. Total Harmonic Distortion and Noise (THD+N): 0.017%. Stereo crosstalk: -70 dB. Input impedance: 10k Ohms. Line level output; supports multimedia speakers. Maximum I/O levels: 3.1Vp-p (line level). CD quality audio output.
Warranty (Length/Type): Two years.
Certifications: CE, RoHS
Minimum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Maximum Frequency Response (Bandwidth): 20 kHz
Signal to Noise Ratio: 76 dB
Total Harmonic Distortion + Noise (THD+N): 0.02 %
Crosstalk: -70 dB
Transmission Range: 300 ft
Input Impedance: 10,000 ohm
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
AC Voltage (Minimum): 100 Volts
AC Voltage (Maximum): 240 Volts

ST-C6HD-IR-300 - Application Drawing 41 kb - Other

ST-C6HD-IR-300 - Installation and Operation Manual 1360 kb - Instructions

ST-C6HD-IR-300 - Data Sheet 233 kb - Data Sheet