Pro AV Catalog

< Back to Previous Page

Home : Signal Processing Systems : Network Technologies Inc (NTI) - ST-C5CMPSA-600

All Products

HDTV + Stereo Audio Extender via CAT5

Series: XTENDEX®

Model: ST-C5CMPSA-600

Sharpest and clearest video quality over CAT5 of any manufacturer.
Easily transmit a high-definition component video signal to a projector in the ceiling by using compact CAT5 cable instead of bulky cable bundles.
Send high quality video signals from the DVD player in your basement to the great room upstairs.
Supports local and remote TVs/monitors/projectors and speakers.
Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i and 1080p formats.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The XTENDEX® HDTV + Stereo Audio Extender transmits YPbPr component video and analog audio up to 600 feet away from a component video device (DVD, CD, satellite receiver, etc.) using CAT5/5e/6 cable. Each video extender consists of a local unit that connects to a component video device and also supplies audio/video to a local display and speakers, and a remote unit that connects to a TV or monitor and speakers.

For more information, visit http://www.networktechinc.com/hdtv-extend.html

Sharpest and clearest video quality over CAT5 of any manufacturer.
Easily transmit a high-definition component video signal to a projector in the ceiling by using compact CAT5 cable instead of bulky cable bundles.
Send high quality video signals from the DVD player in your basement to the great room upstairs.
Supports local and remote TVs/monitors/projectors and speakers.
Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i and 1080p formats.
Supports analog stereo audio.
Built-in surge protection.
Optional VESA mounting bracket is available for mounting the remote unit to the back of a flat panel monitor.

Extender Type - Component
Extender Type - Other
Warranty - Yes
ROHS Compliant - Yes
Spec Sheet available - Yes

Audio: Audio can be heard both locally and remotely. Signal type: stereo audio, analog, left/right. Maximum input/output levels: 3.1Vp-p. Input impedance: 10K Ohms. Output impedance: 50 ohms. Frequency Response: +/-0.01 dB, 20 Hz to 20 kHz. Total Harmonic Distortion + Noise (THD+N): 0.017%. Signal-to-Noise Ratio (SNR): 76 dBA. Stereo crosstalk: -70 dB.
Depth: 3.08 in
Height: 1.07 in
Power: Local and remote units: 110 VAC at 60 Hz via AC adapter (included). Power Consumption: 10 W (each—local and remote unit)
Video: Signal type: HDTV YPbPr component. Maximum input/output levels: 1.45Vp-p. Input/output impedance: 75 Ohms. Bandwidth: 90 Mhz at 100 feet (30 meters), 50 Mhz at 600 feet (183 meters). Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
Width: 3.48 in
AC Voltage: 110 Volts
Regulatory Compliance: CE, RoHS
Environmental: Operating temperature: 32 to 100°F (0 to 38°C). Storage temperature: -22 to 140°F (-30 to 60°C). Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Remote unit: Three RCA jacks for YPbPr component video and two RCA jacks for analog stereo audio.
Local Unit: Host Connection: Three RCA plugs for YPbPr component video and two RCA plugs for analog stereo audio. Local Access: Three RCA jacks for YPbPr component video and two RCA jacks for analog stereo audio.
Video Quality Adjustment: Automatically adjusts the video quality to compensate for varying lengths of CAT5 cable.
Active Power: 10 Watt
Warranty (Length/Type): 2 Years
Certifications: CE, RoHS
Signal to Noise Ratio: 76 dB
Total Harmonic Distortion + Noise (THD+N): 0.02 %
Crosstalk: -70 dB
Transmission Range: 600 ft
Input Impedance: 10000 ohm
Output Impedance: 75 ohm
Operating Temperature (Maximum): 100 F
Operating Temperature (Minimum): 32 F

ST-C5CMPSA-600 - Application Drawing 40 kb - Other

Component + Audio Extender - Data Sheet 220 kb - Data Sheet

Component + Audio Extenders - Installation and Operation Manual 893 kb - Instructions