Pro AV Catalog

Museum Technology Source, Inc. - DVD-204
Request Quote
All Products

DVD Controller, Pushbuttons Control

Model: DVD-204

  • For Pioneer DVD-V5000 and 8000
  • Established reliability
  • Four selections
  • Attract loop
  • Inputs for four pushbuttons, automatic attract loop play
Compare
Project List
Product Info
Tech Specs
Documents
A basic system is composed of a DVD controller (Museum Technology Source Inc.'s DVD-204 or DVD-212), a DVD player (pioneer model DVD-V7400, 5000, or 8000), and a television monitor. The DVD-204 controller allows for a choice of up to four video segments and the DVD-212 allows up to twelve video segments from a DVD disc. Both units allow for an additional attract or idle segment to play when no segment has been chosen. Single pole, normally open switches, such as pushbuttons mounted in exhibit material, are plugged into the back of the 204 and 212 controllers. If pushbuttons are used, they may be illuminated to give visitors an indication of which video segment is playing. Other such switches, such as motion detectors, timers and, capacitance switches may also be used as inputs. Pioneer DVD player is connected to the back of the controller by an MTS provided cable and the TV monitor is, in turn, connected to the pioneer player. Instructing the system on what part of the video is to be called up by each button or activator is a painless task of following a straightforward menu of prompts. These are available either on the television monitor itself, or on the screen of a PC temporarily connected the Controller. Pressing the rear panel program button enters programming mode. A menu of simple choices will appear on the screen of monitor or the PC, which permit the assignment of particular video segments to particular buttons. A segment may be either the chapter of the disc, or a section of the disc defined by a start frame number and a stop frame number. Several other choices are available such as button options which permit lockout (where pressing the button will not interrupt play) or interruptability (where pressing another button will cause the player to go to another segment). The DVD Controllers have non-volatile EEPROM memories with programming software resident in the controllers. Loss of power to the controller will not effect the programmed information, and the controllers can be reprogrammed at any time. For test and setup purposes, the front panel has illuminated pushbuttons corresponding to those used by the visitor.
  • For Pioneer DVD-V5000 and 8000
  • Established reliability
  • Four selections
  • Attract loop
  • Inputs for four pushbuttons, automatic attract loop play
  • Plays selected segment of disc when idle
  • Four (DVD 204) RJ-11 connectors for normally open switch contacts
  • Pair of frame numbers represent start and stop points
  • Connection to player, via supplied cable, players must be set to 9600 baud
 
Request Quote