The Evertz® 3405FRS-BNC SFP frame is the ideal solution for today's low cost, high density fiber optic distribution needs. The 3405FRS-BNC provides the flexibility to handle the high-speed requirements of 3G and HDTV as well as SD-SDI, SDTi, and DVB-ASI. The 3405FRS-BNC is designed on a standalone frame to house up to 4 hot swappable Evertz® SFP modules. This provides up to 8 EO or 8 OE in a standalone frame. The frame can be configured for a mixture of modules. The on board frame controller provides VistaLINK® capabilties for SNMP control and monitoring. The 3405FRS-BNC frame comes with a primary external power supply module. SFP's and redundant power supply must be ordered separately.
Dual Power supplies (primary and redundant)
Houses up to 4 front loading Evertz® SFP modules
Each slot can be used as an input or output based on SFP type
On board Frame Controller for full VistaLINK® SNMP control and monitoring
No electrical re-cabling required when hot swapping SFP modules
Fiber Optic Connector Type - LC-LC
Fiber Optic Signals Supported - RS-232
Spec Sheet available - Yes
Operating Temperature (Maximum):
104 F
Operating Temperature (Minimum):
32 F
AC Voltage (Maximum):
220 Volts
AC Voltage (Minimum):
110 Volts
DC Voltage:
12 Volts
Depth:
4.13 in
Height:
1.03 in
Width:
7.08 in
Density:
Up to 8 EO, OE, or mixture of EO and OE in a miniature frame
Impedance:
75 ohm
Connector:
BNC per IEC 61169-8 Annex A
Serial:
Single Female mini 9-pin connector
Ethernet:
SNMP over IEEE 802.3/U (10/100 BaseTx) RJ45 connector